BIOS dump for the Quanta board DAX9AAMB6E0, revision E, saved as a raw 16.0 MB BIN file. DA-prefixed numbers follow the Quanta ODM scheme, where the code identifies the motherboard used in an HP, Dell, Acer or other branded notebook. A 16 MB image corresponds to a 128 Mbit SPI flash chip, so the chip on your board must have that capacity. Write it with a CH341A or similar programmer after reading and saving the original contents, and confirm the board number and revision on the PCB.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bioshub. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →