Firmware image for the DEG35AMB8E0 mainboard, revision E, with the Management Engine region fixed and marked as tested working; outimage indicates a full output dump ready for programming. The DA/DE plus MB code pattern resembles Quanta-style numbering, though the name does not confirm the laptop model. Before flashing, compare the board code and revision on the PCB, save the existing chip contents with your programmer and check that the roughly 5 MB archive yields an image matching the flash capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 28 Oct 2021 | Open file on RM Schematics |
| @BiosSchematicWorld | 29 Oct 2021 | Open file on RM Schematics |
| @pepeelectronica | 24 Apr 2022 | Open file on RM Schematics |
| @schematiclaptopramkushwaha | 13 Jul 2025 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →