128-byte EDID binary for a Dell laptop panel with 141wp1 in the name, most likely the LP141WP1 14.1-inch WXGA+ panel, though the name gives no full part number. The data tells the graphics controller resolution, timings and panel ID and is stored in a small EEPROM on the LCD. Rewrite it when the screen is not detected properly. Confirm the label on your panel matches, validate the checksum in an EDID editor, and keep a backup of the original EEPROM.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →