Firmware image for the Dell Inspiron 14R 5437, project D0E40-HSW referring to the Haswell platform, for the DDR3 version on Wistron motherboard 12314-1. The 8 MB binary matches a 64 Mbit SPI chip. Wistron identifies boards with numeric codes such as this, so check it on the PCB together with the graphics memory type, as GDDR5 builds use different firmware. Back up the original chip and verify after flashing with a programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →