Dump set for the Dell E1913C monitor covering two chips, a 25L20 SPI flash and a 24C16 EEPROM, packed in a RAR archive. The 25L20 normally holds the scaler firmware, while the 24C16 keeps settings and EDID-type data. Restoring both can cure boot loops, blank screens or stuck menus. Use a programmer supporting 25-series SPI and 24-series I2C parts, read and save the originals before writing, and confirm the chip markings on your board match these parts.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 19 Aug 2024 | Open file on RM Schematics |
| @generalbios | 5 Nov 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →