A BIOS image for the Dell Latitude E5400, with no version or board revision given in the name. The file is 2 MB, matching a 16 Mbit SPI flash chip. A dump like this is written with an external programmer to recover a board that will not boot after a failed flash or because of corrupted data. Read and store the original chip first, and check the part number and capacity of the flash on the motherboard. Service tag details may need to be entered again afterwards.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →