Firmware dump for the Dell Latitude E5540, read from the chip at position U1 on the LA-A101P REV1.0 motherboard. The word PLYTA is Polish for mainboard. LA-xxxxP numbering is used by Compal, the ODM that built this board. The E5540 splits its BIOS across more than one SPI chip, so this U1 image has to go back into the U1 position and be paired with the matching U2 file. Compare the board number and revision printed on the PCB, back up both original chips, and check that the image size matches the chip capacity before programming.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @SCHEMATICWORLD. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @SCHEMATICWORLD | 17 Feb 2022 | Open file on RM Schematics |
| @SCHEMATICWORLD | 23 Jul 2022 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →