Full 16 MB SPI flash backup taken from a Dell Latitude E7480 built on Compal board LA-E132P. Compal uses the LA-xxxxP numbering pattern, and the size fits a 128 Mbit chip. A technician writes such an image with a hardware programmer to recover a dead or bricked board. A dump read from another unit may carry that unit's service tag and ME data, so keep your own chip's original contents. Check the board number on the PCB before flashing, because an image of the wrong size will not fit.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @schematiclaptopramkushwaha. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →