Firmware dump for the Dell Inspiron 14-3467 laptop, motherboard 15341-1 with the Dell part reference 91N85, sized for a 16MB flash chip. The 15341-1 number follows the Wistron numbering pattern, so Wistron is the ODM behind this board. Open the RAR, check that the image is exactly 16 MB, and confirm the board number printed on the PCB before programming. A clip or a desoldered chip on a CH341A-style programmer is the usual route, and the original contents should be read and stored before any write..
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 19 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 24 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →