Combined EC and BIOS firmware for the Dell Inspiron L502, built by Quanta on the DAGM6CMB8D0 motherboard with discrete graphics (DIS). The 512 KB size is consistent with an embedded controller image. Quanta boards carry DA-prefixed codes on the PCB, and the full code including revision should match before flashing. Discrete and integrated graphics versions use different firmware, so do not mix them. Read and store the original chip first, then write with a programmer and check charging, keyboard and power-on afterwards.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →