BIOS firmware package for the Dell Latitude 5289 2-in-1, built on Compal board CAZ40 LA-E111P revision 1.0, labelled A00. The name references two chip locations, UC5 and UC6, so the archive likely holds a separate dump for each flash device on the board. LA-E111P follows Compal's LA-xxxxP numbering, Compal being the ODM behind this Dell design. Before programming, confirm the board number and revision on the PCB, read and save the original contents of both chips with your programmer, and check that each image size matches its target flash part.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 2 Dec 2021 | Open file on RM Schematics |
| @BiosSchematicWorld | 9 Dec 2021 | Open file on RM Schematics |
| @pepeelectronica | 24 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →