Firmware package for the Dell Latitude 5420, project GDF40, on Compal board LA-K491P revision 2.0, labelled for the Core i5 11th Gen configuration with a 32 MB flash image, SSD and TPM. The 51.7 MB RAR likely holds more than a single image. Compal boards use the LA-xxxxP format, printed with the revision on the PCB. Program the dump with an SPI programmer only after reading and saving the original chip, which holds service tag data, and check that the 32 MB image suits the fitted chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @jdbiosworld. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @jdbiosworld | 6 May 2026 | Open file on RM Schematics |
| @jdbios_world | 6 May 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →