Dell Latitude 5530 firmware set for the SouthPeak15 MLK SB design, board 203102-1, including a 32 MB and a 16 MB image, in a 16.6 MB RAR. The six-digit number with a dash suffix follows the Wistron numbering pattern, indicating Wistron as ODM. Two images point to two flash devices, so each must go to the chip of matching capacity. Use an SPI programmer, save the original dumps first, and verify the board number on the PCB before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 28 Aug 2023 | Open file on RM Schematics |
| @generalbios | 12 Oct 2023 | Open file on RM Schematics |
| @generalbios | 19 Oct 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →