Firmware for the Dell Latitude 7300, project EDC30, main board LA-G861P, with version 1.6.1 stated in the name, packed in a 6.92 MB RAR. LA-G861P follows Compal's ODM numbering. The image can be written to the SPI flash with a hardware programmer to recover a board after a failed update or corrupt BIOS. Confirm the board number on the PCB, read and keep the original dump, which holds service tag data, and check that the image size matches the chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (10)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 24 Jun 2020 | Open file on RM Schematics |
| @biositechyangiyer | 28 Jun 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 28 Jun 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 6 Jul 2020 | Open file on RM Schematics |
| @biosarchive | 22 Oct 2020 | Open file on RM Schematics |
| @one5technology | 21 Nov 2020 | Open file on RM Schematics |
| @biositechyangiyer | 1 Feb 2021 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @skclappybios | 10 Apr 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →