16 MB BIOS dump for the Dell Latitude E5470, board KP60X LA-C832P, reported as working. The board number follows the Compal pattern, as Compal produced this motherboard for Dell. The raw BIN goes directly onto the SPI flash chip using a hardware programmer, which helps restore boards with failed updates or no POST. Always read and keep the original chip contents, make sure the chip is 16 MB, and confirm the PCB revision before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @schematiclaptopramkushwaha. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →