Working dump for the Dell E176FPf monitor main board QLIF 046, revision A, covering a 24C02 EEPROM and a W25Q010 SPI flash. The SPI image typically carries the scaler firmware, while the small 24C02 holds configuration or EDID data. Reflashing them can revive a monitor with no image, failing power-up or garbled settings. Use a programmer supporting both 24-series and 25-series chips, save the existing contents before writing, and check that board revision A matches.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 18 Aug 2024 | Open file on RM Schematics |
| @generalbios | 5 Nov 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →