Firmware for the Dell OptiPlex 390 desktop, built on the MIH61R motherboard with the Intel H61 chipset, supplied as a 1.79 MB ZIP. The name gives no BIOS version or chip type, so check the contents and compare the image size with the flash chip on your board. A file like this lets you recover a board that fails to start after a bad update or shows no display. Write it with an SPI programmer such as a CH341A, and keep a backup of the original chip, which stores the service tag.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (13)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 13 Jun 2020 | Open file on RM Schematics |
| @biositechyangiyer | 13 Jun 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 28 Jun 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 6 Jul 2020 | Open file on RM Schematics |
| @one5technology | 21 Nov 2020 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 24 Apr 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @skclappybios | 10 Apr 2024 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 27 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →