Tested firmware dump for the Dell XPS 13 7390 2-in-1 with a 10th-gen Intel Core i7-1065G7, built on Compal board LA-J191P, in a 28.8 MB RAR. Compal's LA-xxxxP numbering identifies the ODM design, so check the board label before flashing. The image is written to the SPI BIOS chip with a programmer to recover from failed updates or no-power faults. Dell firmware stores service tag and other system data, so back up the original chip before writing, and confirm the image matches the chip size.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (11)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 20 Sept 2023 | Open file on RM Schematics |
| @Laptopbiossolutions | 20 Sept 2023 | Open file on RM Schematics |
| @generalbios | 4 Oct 2023 | Open file on RM Schematics |
| @generalbios | 8 Oct 2023 | Open file on RM Schematics |
| @generalbios | 9 Oct 2023 | Open file on RM Schematics |
| @generalbios | 13 Oct 2023 | Open file on RM Schematics |
| @generalbios | 15 Oct 2023 | Open file on RM Schematics |
| @generalbios | 19 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
| @generalbios | 29 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Nov 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →