EDID data for a Dell Inspiron 1525 fitted with a B154EW02 V3 panel, 256 bytes. The image reproduces the contents of the LCD identification EEPROM, which reports native resolution, timings and vendor details to the graphics hardware. Use it to restore a panel whose EEPROM is corrupted, leading to a black screen, a generic monitor entry or a wrong default mode. Confirm the panel model and V3 revision on its label, read and keep the existing contents, then flash using an I2C EEPROM programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @pepeelectronica | 20 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 24 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 23 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →