Dell Inspiron 1710 LCD EEPROM image for a Sharp 1920x1200 panel, 2 KB in size. That is larger than a plain EDID block, so it likely represents a full 24C16-class chip read, including the identification data the graphics controller reads at boot. It helps when the 17-inch class screen shows no image, a wrong resolution or is not detected after a panel swap. Check that the chip on your panel has the same capacity, back up the original contents and confirm the Sharp WUXGA panel version before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 5 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →