Firmware image for the DENA STB802T2 receiver, with the board marked DVB-MPEG-164G ver1.0. At 4.00 MB it corresponds to a 32 Mbit SPI flash, the usual storage on DVB-T2 set-top boxes, and is meant to be programmed straight onto the chip to fix a unit that hangs or will not start. Compare the board label printed on the PCB with the one given here before writing. Read and save the original flash contents first, since tuner and remote settings can vary between production batches.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →