Firmware image set for the Denay STB932T2, a DVB-T2 set-top receiver, supplied as a 3.00 MB RAR archive. The name gives no software version, flash chip or tested status. Receiver dumps of this kind are used to revive units stuck on boot or with corrupted software, usually by programming the flash memory directly or through a service loader. Back up the existing chip first, confirm the tuner board matches the model, and check that the dump size equals the capacity of the flash chip fitted to your receiver.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (10)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 18 Aug 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 19 Aug 2020 | Open file on RM Schematics |
| @biositechyangiyer | 27 Aug 2020 | Open file on RM Schematics |
| @biositechyangiyer | 10 Sept 2020 | Open file on RM Schematics |
| @one5technology | 21 Nov 2020 | Open file on RM Schematics |
| @pepeelectronica | 24 Apr 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →