Raw firmware image for a DG31PR motherboard, part of Intel's desktop board range, 512 KB in size. The name carries no version or revision details. The image suits a 4 Mbit flash device and is meant for direct programming when a board is bricked or shows corruption at boot. Read and keep the original contents before erasing, confirm the board marking and chip size, and verify the write in the programmer software so the BIOS can be restored again if needed.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptopdesktopbiosbin. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →