Firmware dump for the DG41RQ, an Intel G41-chipset desktop board code, marked as tested OK by its source. The RAR is 829 KB and should hold a flash image for direct programming of the BIOS chip. Use it when the board shows no display, a dead POST or a failed update. Back up the current chip before erasing it. Check that the board model on the PCB is DG41RQ and that the chip capacity fits the image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (10)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 15 Feb 2021 | Open file on RM Schematics |
| @BiosSchematicWorld | 26 Oct 2021 | Open file on RM Schematics |
| @pepeelectronica | 20 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 24 Apr 2022 | Open file on RM Schematics |
| @schematiclaptopramkushwaha | 13 Jul 2025 | Open file on RM Schematics |
| @schematics_bios | 23 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 23 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →