BIOS image for the Intel DG45ID motherboard, based on the G45 chipset for Core 2 processors. The 4.00 MB size corresponds to a 32 Mbit SPI flash chip. A full image like this restores a board that powers on but gives no POST after a bad flash, and is written with an external programmer. Confirm the DG45ID model on the PCB, read and back up the original chip contents before erasing, and make sure the detected chip capacity matches the file so the image fits completely.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @laptopdesktopbiosbin. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →