Firmware dump from a D-Link DSL-2640U ADSL router, marked as read successfully, packed as a RAR of about 3.45 MB. Being a raw BIN read from the flash chip, it can restore a router bricked by a failed update or corrupted bootloader. Write it with an external SPI programmer after desoldering or clipping onto the chip. Hardware revisions of this model differ, so check the label on the unit, save your own dump first, and make sure the image size matches the flash chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 13 Feb 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 9 Jul 2020 | Open file on RM Schematics |
| @one5technology | 21 Nov 2020 | Open file on RM Schematics |
| @pepeelectronica | 24 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →