BIOS and EC firmware set for a DNS laptop, model reference 0161881, built on the Clevo W251ESMB-0D platform. DNS sold rebadged Clevo machines, so the board design is Clevo's. Having both the BIOS and the embedded controller image allows a full recovery of boards that will not power on or post. Flash with an SPI programmer, keep a backup of the original chips first and confirm the image sizes match the flash chips before writing. Check that your board carries the W251ESMB marking.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 16 Oct 2018 | Open file on RM Schematics |
| @IT_SERVICE_WORLD | 29 Oct 2019 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →