Firmware binary for the HP DV2000 line, identified in the name as the dv2106 with an Intel platform, 1.03 MB in size. Repair shops use dumps like this to reprogram the BIOS chip when a laptop powers on without display or stops at a corrupt boot block. Read the chip label and check its capacity, since a mismatched image size will not program correctly. Keep a copy of the original read, and make sure the Intel board matches before flashing, as AMD versions of this series use different firmware.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 16 Feb 2017 | Open file on RM Schematics |
| @biosarchive | 8 Mar 2017 | Open file on RM Schematics |
| @abgm_manutencao_bios | 8 Aug 2019 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →