Second DV4I firmware dump, 1.00 MB .bin, with (2) in the name marking a duplicate copy rather than a different board. The name states no revision, chipset or BIOS version, and the I suffix is not explained. Such a file matches an 8 Mbit SPI flash and is opened as raw binary by programmer software or a hex editor. Comparing it with the other copy helps confirm a clean read. Save the existing chip before flashing and check that the motherboard number on the PCB is identical.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →