Firmware dump from a HiVision 4-channel DVR using the HY-BH-8286-4-T board, listed as a 5in1 model that typically supports several analogue camera formats. The RAR archive should contain a raw image of the recorder's SPI flash. Repair shops write such files with a programmer like the CH341A or RT809 to recover units that fail to boot or lost their configuration after a bad update. The board suffix and channel count must match your hardware, so check the PCB first and keep a backup of the original chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @led_software. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @led_software | 21 Jul 2021 | Open file on RM Schematics |
| @hashmielecom | 1 Aug 2023 | Open file on RM Schematics |
| @led_software | 13 Sept 2023 | Open file on RM Schematics |
| @tvsoftwareworld | 11 Apr 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →