Firmware dump for a device identified as E1960T, stored for an A25L020 flash chip, a 2 Mbit (256 KB) SPI part from AMIC, and marked as tested OK. E1960T is likely a monitor model, but the name does not give the brand, so confirm the device and main board before use. Select the A25L020 in your programmer software, read and save the existing contents, then write and verify. An image whose size differs from the chip capacity indicates the wrong file.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 12 Aug 2023 | Open file on RM Schematics |
| @generalbios | 4 Nov 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →