Firmware image for the Dell E6410 on Compal board LA-5472P rev 1.0, BIOS A00, dated 2010-01-18, intended for the flash chip at position U12. At 8 MB it is the larger companion to the 4 MB U13 dump for the same board. Compal's LA-xxxxP numbering identifies the PCB, so match the number on the board first. Program it with an SPI programmer after reading and saving the original chip, and confirm the chip is 8 MB, since an image of the wrong size will not fit or boot.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @BiosSchematicWorld. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →