BIOS image for the ECS H110M4-C23 desktop motherboard, an Intel H110 chipset board, stored as an 8 MB binary. The ClrMe tag indicates the Intel Management Engine region has been cleared or cleaned, so the dump can be written to a board without carrying another unit's ME state; the LRT suffix is not explained by the name. Program it to the SPI flash with a programmer such as a CH341A after saving the original chip contents. The image size must match the installed 8 MB flash, and the board model on the PCB should match exactly.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →