BIOS binary for the ECS H61H2-M2 motherboard, revision V2.0, marked in the name as OK, meaning it was reported working. The 8 MB size fits a 64 Mbit SPI flash device, typically programmed with a CH341A, TL866 or similar tool. It is useful when a board fails to post because of corrupted firmware. Make sure your PCB is the V2.0 revision, since a different revision may carry different hardware, and save a copy of the original chip before you write this image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptopomi. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →