BIOS dump for the Esonic G41CDL2 desktop motherboard, a 1.00 MB binary, which corresponds to an 8 Mbit flash chip. The G41 in the model points to the Intel G41 chipset family indicated by the board name. Such a file is used to revive a board stuck with no POST after a failed update, by writing it to the BIOS chip with a programmer like the CH341A. Read the original chip first, confirm the chip capacity is 1 MB, and check that the board model on the PCB matches exactly.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @afsbiosfree. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →