Second copy of a firmware dump for the Fujitsu ESPRIMO Mobile V5535, carrying version 1.13 in its name and sized at 1 MB. Because a duplicate with the same label exists, comparing both in a hex editor can show whether they are identical or one was read from a different unit. Such ROM images are typically programmed into the BIOS flash chip with an external programmer to revive a laptop that will not boot. Always save the original chip data first, confirm the 1 MB capacity, and verify the write with a read-back comparison afterwards.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .rom file
A BIOS image as shipped by the vendor (commonly AMI) — often the BIOS region only, without descriptor or ME.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →