Raw BIOS dump of 1.00 MB for the Fujitsu Esprimo Mobile V6555 built on Inventec board 6050A2271001, read from an M25P80 flash chip, an 8 Mbit SPI part that matches the 1 MB size exactly. The 6050A prefix follows Inventec board numbering. The image is used to reprogram that chip with an external programmer, often after a failed update or a dead board that will not start. Confirm the board number on the PCB, save the original chip contents, and verify the written data afterwards.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →