Firmware archive for an EXO Cloudbook E15, about 3.64 MB, with the name noting DE, 12V, board t314p revision 05 and 1,8v, which most likely refers to a 1.8 volt flash chip. That detail matters: a 1.8 V SPI chip needs a programmer or adapter that supplies 1.8 V, as a standard 3.3 V CH341A setup can damage it. Match the t314p rev05 marking on the PCB, read and save the original chip before writing, and confirm the image size fits the installed flash.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 12 Oct 2021 | Open file on RM Schematics |
| @BiosSchematicWorld | 2 Nov 2021 | Open file on RM Schematics |
| @schematiclaptopramkushwaha | 13 Jul 2025 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →