Dump of the UC5 flash chip from board FDI55, Compal LA-J081P revision 1.0, as an 8 MB raw .bin, which matches a 64 Mbit SPI part. The name does not state the chip's role; on boards with two flash chips the smaller one often carries EC or a secondary image, so check against the schematic. It pairs with the 16 MB UC6 dump of the same board. Read and save the original contents before writing and make sure the image size fits the chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @afsbiosfree. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →