Flash memory dump for a DVB-T2 set-top box identified as STB943T2, packed in a 6.34 MB RAR archive. The name gives no main chip, flash type or firmware version, so open the archive and check the image size against the flash chip fitted on the receiver board before programming. Such dumps are used to revive receivers stuck on boot, looping or showing a blank screen, by writing the image directly to the SPI or NAND flash with a programmer. Read and save the original chip contents first, since tuner and region data can differ between batches.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 21 Apr 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 8 Jul 2020 | Open file on RM Schematics |
| @one5technology | 21 Nov 2020 | Open file on RM Schematics |
| @pepeelectronica | 25 Apr 2022 | Open file on RM Schematics |
| @skclappybios | 10 Apr 2024 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 2 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →