Binary flash dump of 4.00 MB labelled for an SR 5020 HD device; the name gives no further details on hardware revision, firmware version or flash chip type. Such raw images are written to the SPI or parallel flash with a hardware programmer to recover a unit stuck at boot or corrupted by a failed update. Read and save the original chip contents first, confirm the chip capacity equals the 4 MB image, and make sure the board version matches, because a mismatched image can leave the device unbootable.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_files_Request. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →