BIOS archive for the Foxconn H61S desktop board in its version 1.0 hardware form, built on the Intel H61 chipset and sized for a 4MB flash chip. A separate image exists for Ver 2.0, so read the version printed near the board edge or slots to avoid mixing them. Use an SPI programmer to restore a board that powers on with no display after a bad flash. Save a dump of the existing chip first and check the extracted file is exactly 4 MB before writing it..
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 19 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 25 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 2 Aug 2026 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →