Raw firmware image for the Freenet X6 HD PVR satellite receiver, a 4.00 MB BIN file that matches a 32 Mbit SPI flash chip. A dump like this is written directly to the memory with a programmer such as a CH341A to revive a box that does not boot. Before writing, confirm the chip on the board is 4 MB, read and save its current content, and verify the write afterwards. The name gives no version or board revision, so compare hardware markings with the source when possible.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @tvsoftwareworld. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →