Firmware set for the Fujitsu E754 notebook, board CP642130-Z3, containing images for a 4 MB and a 1 MB flash chip, marked as checked OK. This laptop uses two SPI chips, so each image must go to the correct device according to its capacity. The 6.37 MB RAR is used with an external programmer to recover a board with corrupted firmware. Verify the board code on the PCB, read and keep both original chips first and make sure each file size matches its target chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →