Fujitsu Esprimo X9510 MB A03 6050A2202701

BIOS .bin 4.00 MB Shared

Raw 4 MB BIOS image for the Fujitsu Esprimo X9510 all-in-one, mainboard 6050A2202701 revision A03. The 6050A number follows the Inventec pattern, identifying the board maker. Being an uncompressed BIN, it can be loaded straight into programmer software and written to a 4 MB (32 Mbit) SPI chip. Check that the board number and the A03 revision on the PCB match. Read and save the existing chip contents before erasing, because system-specific data stored there may need to be restored.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files