Firmware for a Linksys WRT54G2 wireless router, hardware version 1.5, firmware 1.5.02.005 for the US region, dated 21 February 2012, in a 1.63 MB RAR. A router image like this is normally loaded through the web interface or a TFTP recovery procedure. When the unit is bricked, the flash chip can be reprogrammed directly instead. Make sure the hardware version on the label matches 1.5, as images for other revisions are not interchangeable and can leave the router unbootable.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (9)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 4 Feb 2021 | Open file on RM Schematics |
| @laptexlaptopbios | 5 Feb 2021 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 25 Apr 2022 | Open file on RM Schematics |
| @skclappybios | 10 Apr 2024 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 27 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 2 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →