Firmware dump for a Canon G2400 printer read from a 25Q32 SPI flash chip, which holds 4 MB, matching this file size. The chip stores the main printer firmware, so the image is useful when the printer is dead, stuck at startup or bricked after a failed update. Write it with an SPI programmer after reading and saving the original contents, verify the write, and use it together with the matching 24C16 EEPROM dump where that chip is also involved.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_main_ec_kbc. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →