Raw BIOS image for the ECS G41T-M13 desktop motherboard, version 1.0, supplied as a 1.00 MB BIN file, which matches an 8 Mbit SPI flash. The G41 in the name points to the Intel G41 chipset. Program it with a CH341A or similar programmer to recover a board that powers up but shows no display because of corrupted firmware. Check the board revision printed on the PCB, back up the original chip, and confirm the installed flash is 1 MB.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →