Duplicate read of the G50I BIOS image, 2 MB and matching a 16-megabit SPI chip. The name does not reveal the manufacturer, motherboard number or firmware build. Two reads are commonly kept to verify that the chip was read correctly, so compare checksums with the first file. Identify the board through strings inside the image, confirm it matches the PCB, and back up the original flash before programming with a CH341A or similar tool.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →