Binary BIOS image labelled for the HP g6-1111se laptop, 4 MB in size. No brand field or board number is given beyond the model code, so the board number on the PCB is the best way to confirm compatibility, since g6 units shipped on several different motherboards. A file of this size normally matches a 32 Mbit SPI flash and is written with an external programmer. Read and keep the original chip contents before erasing, and verify the write after programming to rule out a bad clip connection.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →